2020 Nissan Altima Lug Nut Torque (2024)

FAQs

2020 Nissan Altima Lug Nut Torque? ›

Torque Specifications of Nissan Altima Lug Nut

Most vehicles have lug nuts that require around 100 pound-feet of torque, but some vehicles require more or less. It's best to check your vehicle's manual to find out the exact specifications you need. You should properly torque your lug nuts when installing new wheels and after driving 50 to 100 miles on new wheels.

If the check engine light (also known as the Malfunction Indicator Light) comes on — either steady or blinking — while the engine is running, it might mean a malfunction with the emission control system.

M12x1. 25 Open End Bulge Acorn Locking Lug Nuts (3/4" and 13/16" Hex)

Torque Specifications of Nissan Altima Lug Nut

In addition to the proper socket size, you must tighten the lug nuts to the correct torque spec on your Nissan Altima's wheels. This ensures the wheels are securely fastened without overtightening. The factory torque spec for most Altimas is 80 ft-lbs.

An ideal way is to use a torque wrench, which shows (or can be set) a number that indicates how tight the nut is. Any mechanical shop has them. A roadside way (or driveway) is just to use the tire iron that came with your car and put them as tight as you can.

There are very few chances that 250 ft-lbs delivers enough torque to loosen lug nuts. Most car lug nuts require higher torque values. Similarly, the standard range is 80 ft-lbs to 150 ft-lbs.

This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

It depends on the car model, rim size, design (aluminium or steel rims) and number of bolts. It is normally between 110 N⋅m and 120 N⋅m. If you change the rims on your car, you will find the new torque values in the rim certificate.

What gas for Nissan Altima 2020? ›

It's recommended that you fill your Nissan Altima with regular grade 87 octane fuel.

The Intelligent Forward Collision Warning system uses a radar sensor located behind the lower grille below the front bumper to measure the distance to a second vehicle ahead in the same lane.

What size bolt pattern does a Nissan Altima have? Since 2002, all Nissan Altimas have featured a 5x114. 3 bolt pattern, also known as a 5x4. 5 bolt pattern.

The most common Altima sizes include 215/60R16 tires, 215/55R17 tires, 235/45R18 tires and 235/40R19 tires, depending on the year model and trim level of your Altima.

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

Typically only 10% to 15% of the overall torque is actually used to tighten the bolt, the rest is used to overcome friction in the threads and on the contact face that is being rotated (nut face or bolt head).

When rechecking torque value, wait for the wheels to cool to ambient temperature (never torque a hot wheel).